The guide to Blupinta
How to draw your home, furnish it, check it and share it, step by step, on one example home you can download and follow along with.
Four ways in
Section titled “Four ways in”Your first homeFrom nothing to a furnished flat in 15 minutes: the place to start.
TutorialsLonger walks through a real job: a scanned plan traced, a balcony and a stair, a living room furnished, a renovation shared.
By taskDrawing the plan, furnishing, checking and sharing: each page a job, its steps and its result.
Tools and referenceEvery tool of the dock in detail with its demo, every key, the opening parts, the words.
Getting started
Section titled “Getting started”Your first home in 15 minutesA simple version of the example flat, from nothing to 3D: a new project, the wizard on the example's floor plan, the outer and inner walls traced over it, the rooms named, a door, a window, a sofa from the catalogue.
Signing inSigning in to Blupinta at auth.blupinta.app with a link and a code by email or a passkey, the account made the first time, and what happens when a link or a session ends.
Your projectsThe projects page: the house you worked on last, every project as its plan, filters, search and order, each card's menu, the archive, and the ways to start a house.
A new homeThe wizard that starts a house: its name and where it starts from, the house, its levels, the drawing put to scale and north, the usual measures, the windows and doors, and leaving it to resume later.
Finding your way in the editorWhere everything is in the editor: the project's panel and its menu, the three workspaces, the next steps, the inspector and its bar, the bars around the plan, the dock, and what changes for a viewer.
Finding anythingOne search for the editor's commands, the plan's elements, the settings, the guide and, in Furnish, the catalogue: how to open it, its scopes, what each result does.
The plan and the 3DThe plan alone, the 3D alone or both: the split's layouts, zooming and moving round the plan with a mouse, a trackpad or fingers, and the 3D's saved viewpoints.
Your settingsOne window for how you like Blupinta, kept with your account: look, language and formats, units, the editor, new homes, shortcuts, emails, and the version.
Your accountYour name and photo, your address, the passkeys you sign in with, the devices you're signed in on, taking your data away and deleting the account.
Tutorials
Section titled “Tutorials”From a drawingFrom a scanned floor plan to a plan of walls: the drawing imported, put to scale, straight and turned to north, the walls traced over it with magnetic walls, the curved bay drawn as an arc, checked against the drawing's dimensions and normalised.
A balcony and a stairThe example flat's south balcony made an outdoor room with its step down and railing, then the mezzanine's room and the straight stair that climbs to it from the living room.
Furnishing a living roomThe example flat's living room furnished from the catalogue: the TV cabinet against the wall at a typed distance, the TV over it, the sofa facing them and the coffee table in front, lined up, a cube shelving unit with drawers and doors, the distances checked and the sofa and table saved as a set.
For the dashboardPreparing the example home for a home dashboard, the rooms' ids and uses, the views it looks at them from, the light switches, and the version it reads.
Renovating togetherA renovation planned with other people: an editor and a viewer invited, a comment on a wall, a change seen live, a version created before the works, compared and restored.
Drawing the plan
Section titled “Drawing the plan”The drawing under the planBring your floor plan in as an image or a PDF page, put it to scale and straight, and trace the walls over it.
Editing wallsSplit, join, curve, turn and square the walls you drew; their inspector, their faces and their elevation.
Selecting and movingChoose what to change, on the plan or in the outline; move it by the centimetre, copy it, delete it, and go back.
SnappingWhat the pointer catches while you draw and drag, in which order, the keys that change it, and its switches.
Typing and dragging numbersEvery number of the editor can be typed in any unit, dragged by its label or stepped with the arrows; measures on the plan are typed where they are.
RoomsA room is a space closed by walls, with a name: what it is for, its floor, the paint on its walls, its measures, and how the dashboard looks at it.
Doors and windowsAn opening selected: its type, kind, width, sill and head, its place along the wall, its inside, its hinges and the side it opens to, a flat frame on a curved wall.
Opening typesThe house's windows and doors defined once: making a type, saving one from an opening, applying it to several, changing and deleting it, and the type each tool starts with.
Switches and socketsLight switches and sockets on the walls: their type, their height from the floor, the house's or one of their own, their modules and their place along the wall.
Blocks, lights and awningsThe plan's other elements and their inspectors: blocks and claddings, ceiling lights, LED strips and sun awnings.
Stairs and levelsA stair's inspector, and the house's structure: its levels, areas, plans and presentations, with the example's mezzanine.
Measures and notesDimensions on the plan, a measure taken on site that sets two walls apart, where each measure comes from, and notes for the people who read the plan.
The house's settingsWith nothing selected, the right panel is the house: its standard measures, the plates' heights, its levels, the drawing, its library, where it is and what new things start with.
Checking the homeThe Checks drawer: the problems that keep a version of the home from being saved and their fixes, a review with rules and arithmetic, the sockets the norm asks, and the materials with their quantities.
SelectThe Select tool picks what you click or box, and moves it by dragging; it also moves corners, bends walls and slides openings along their wall.
PanThe Pan tool moves the view of the plan by dragging it, without touching anything; Space held, the middle button and the wheel do the same from any tool.
WallThe Wall tool draws walls click after click, as a chain: straight or curved, typed to the centimetre, of the thickness, height and kind its bar sets; ⇧W draws separators.
RectangleThe Rectangle tool draws four walls and the room they close in one gesture, dragged from corner to corner or clicked one corner then the other.
SplitThe Split tool cuts a wall in two where you click or at a distance you type, showing first the two lengths it would leave and refusing over an opening or at an end.
RoomThe Room tool turns a region closed by walls into a room with one click, and asks for its name.
DoorThe Door tool puts a door in a wall where you click, showing first where it falls and how far it is from what is beside it; the bar its type and width.
WindowThe Window tool puts a window in a wall where you click, at the sill and head of its type, showing first where it falls and its distances.
French windowThe French window tool puts a glazed door to the floor in a wall where you click, showing first where it falls and its distances.
Light switchThe Light switch tool puts a light switch's plate on the side of a wall you click, in the room that side faces, at the house's height.
SocketThe Socket tool puts a socket's plate on the side of a wall you click, in the room that side faces, at the house's height for sockets.
LightThe Light tool puts a ceiling light where you click, or an LED strip from one end to the other, on the plan.
BlockThe Block tool draws a box from corner to corner, a pillar, a shaft or a piece of furniture not in the catalogue yet, 80 cm high until you change it.
AwningThe Awning tool hangs a sun awning on the side of a wall you point at, 3 m wide and 2.50 m deep, centred on the pointer.
StairThe Stair tool traces a stair along its walking line, straight, L-shaped or U-shaped, or a spiral round its centre, climbing to the level above.
MeasureThe Measure tool gives the distance between two points of the plan, snapping as you click, and keeps it as a dimension if you want.
NoteThe Note tool pins a few words on the plan, in a colour of five, for the people who read it and print it.
CommentThe Comment tool pins a comment on the plan, on a point or on an element it then follows, for the people the project is shared with.
WalkThe Walk tool sets where the first-person view starts, standing at one point of the plan and looking towards another; 3D in first person shows it.
PlaceFurnish's Place opens the search on the catalogue; a product found is configured, added to the home and dragged onto the plan, where it stands against the wall.
Compose a wallFurnish's Wall tool opens a wall face seen from the room, with what hangs on it and what stands in front, to drag the pieces, align them, space them evenly or lay them out in a grid.
ArrangeFurnish's Arrange shows what the inspector offers for several pieces selected, to line them up on an edge or a centre and space them evenly.
What fitsThe catalogue's What fits filter takes a space traced on the plan, its width, depth and the ceiling's height, and shows only the products that fit in it.
Calibrate the drawingCalibrate the drawing puts the floor plan under the plan to scale from two points of a length you know, such as a dimension or a long wall.
Furnishing
Section titled “Furnishing”The catalogueFinding a product by its name, category, filters and size, reading its sheet, and choosing its options before it goes into the home.
Placing furnitureDragging a product or a piece onto the plan: how it stands by how it is mounted, the room it belongs to, its distances and the space it needs, the tray, and the piece's inspector.
Arranging furnitureLining pieces up and spacing them evenly, repeating one in a row, duplicating it right beside itself, turning pieces, and composing the pieces on a wall.
Groups and setsPieces grouped to be selected and moved as one, and saved as a set of the home to place again, as many times as you like.
The inventoryEvery piece of the home in one list, by room: what it is, its options, whether it is placed; filtered, edited, and moved, duplicated or deleted several at a time.
Floors and kitsMake a floor from a photo or a colour, laid straight, offset, in herringbone or hexagons; keep it in the home or among your kits for every project.
The walkWhere a person stands to look at the home in first person, its inspector, and the 3D seen from there; walking around and using things are not there yet.
Sharing
Section titled “Sharing”Inviting peopleThe Share window, who can edit and who can only see, invitations by email, the bell and the projects page, handing a project over and leaving it.
Working together liveSeveral people in the same project at once, who is in it and where they look, following someone, undoing only your own steps, working offline and a change the server refuses.
CommentsComments pinned on the plan, mentions, replies, editing and deleting a message, resolving a thread, the comments panel, and who is told, in the bell and by email.
NotificationsThe bell, what it tells you and how to read it, and the emails Blupinta sends you, at once or in the morning's summary.
History and versionsEvery change with who made it and when, going back over your own steps, and the versions, looked at, compared with the draft, restored, and the way to create one.
Printing and exportingThe plan printed to scale on A4 or A3, or saved as a PDF or an SVG, and the home saved as a file and imported again.
Connecting an appLetting an app use your account, like a home dashboard reading a project: the code it shows, what it asks for, the project it may read, and disconnecting it.
Reference
Section titled “Reference”Every keyEvery command of the editor with its keys, where each one works, the keys you hold while the pointer moves, and how to change any of them.
Opening partsEvery part a door or window can have, as its inspector and its type set it: the leaves and how each opens, glazing, frame, sills and shading.
Units and numbersThe units lengths are shown in, how numbers and dates are written, and everything a length field understands when you type in it.
The home fileWhat the .home.json file a project exports holds, its units and its version, for whoever reads a home outside the editor.
The public APIFor whoever builds an app on Blupinta: getting a token at auth.blupinta.app, what /v1 at api.blupinta.app reads, and how it answers.
LibrariesBlupinta's libraries for the public API: TypeScript, React, the command line, an MCP server for AI agents, Python. Each with its first lines.
The words of BlupintaWhat each word of the editor means, from a sheet and a plan to a draft, a version and a kit, with the page that explains it.